How To Fix Ps4 Controller Red Light Issue (6 Tested Methods)

GamingEdit is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

An issue that is encountered by many PS4 controller owners is the infamous PS4 controller red light of death. This blog post will help you fix this issue if it ever arises. It’s important to note that there are a lot of different reasons why your controller could be giving off a red light and not all of them require you to purchase a new one.

So, before we get into how to fix your controller let’s go over some common things that cause the PS4 controller red light and what it means.

What Does It Mean When The PS4 Controller Light Is Red?

There can be many reasons for the PS4 controller to show a red light. One of them is a connection issue with the console or wireless or an update failure. Other potential causes are a full battery, low battery, controller malfunctioning in some way, and/or a defect with your PS4 system itself.

PS4 Controller Red Light: Everything You Need To Know

There are a few things you can do to fix PS4 controller red light issues.

First, it’s important to know what can cause the issue in the first place. Some common causes are low battery, Bluetooth-enabled connection issues, left stick being jammed or broken, or thumbsticks that have gotten dirty or encrusted with debris.

One of the most common causes is when people charge their PS4 controllers improperly because this could result in circuits within the controller overheating. If all else fails and cleaning does not work for thumbsticks, purchasing new parts might be necessary which will require soldering experience since there is solder involved.

Red lights are the signal that the controller might not be broken. In certain instances, there can be a broken board with the controller. If this controller works and shows no problems but you also have a red light then there are things that should not be worried about.

If it consistently turns to the red light on the PS4 controller and disconnects from it with the PCI port then it could be something wrong. Here we have listed many possible remedies how to fix PS4 Controller Red Light issue.

How Do You Fix A PS4 Controller Red Light Issue?

The red light on PS4 controller could mean many things. It seems nice to know if nothing is wrong thanks to indicators. In this guide, I will explore the whole problem of red light.

From knowing why it shows up to several solutions on how to repair such kind of problems. Read through and find out the entire solution for a PS4 controller red light issue.

Read also: Best SSD For PS4

1. Check The USB Port

The big reason to show a red light on Sony’s PlayStation 5 Controller was the damaged USB port. If it doesn’t work it will also be useless to charge the battery. You should clean your USB-Port thoroughly and try charging the battery.

If the issue persists then try adding the cable to another USB -Port. Then if the problem has been uncovered then follow the below measures: Clean all USB ports and charge batteries fully. If you have problems then fix them by next steps: Connect the connection to another port.

The next step is to connect it to another USB port and charge the batteries.

2. Reset The PS4 Controller

One small bug in the PS4 control panel could force the red light to flash. This is because there were some bugs that may have been working with the software. Simply reset and you’ll be good to go.

Simply press the reset button located beside the L2 button. You can use sim-ejectors or even pins to press the button. Bright signal lights should be removed. If any of these methods fail you might have to replace the PS4 controller ribbon cables.

  1. On the back of your PS4 controller, there is a reset button.
  2. Using a pin or needle, press the reset button.
  3. Connect your USB charging cable back to the PS4 controller.
  4. Press the power button on your PS4 controller to turn it back on.

3. Reset The PS4 Console

                 Image Credit To PC Error Fix

The issue can be that sometimes the controller flashed on a red light. The same issue could arise as console and controller idle or in case of software updates. The best thing would be resetting the machine when it was a problem.

  1. Start by pressing the power button on your PS4 console for 10 seconds.
  2. Next, unplug the power cord from your console.
  3. Wait 10 seconds to plug the console back in.
  4. Plug the power cord and PS4 controller back into the console.
  5. Power on your PS4 console.

4. Reboot PS4 in Safe Mode

If none of the methods worked correctly then reboot your PS4 console again in safe mode to check for the red light in your PS4 controller that blinks. Reboot your console into safe mode if you encounter firmware faults on your controller and console. Follow the below information and do this when your PS4 controller is On.

  1. Start by powering off your PS4 console.
  2. Next, press and hold the power button with the console off. You should hear two beeps.
  3. Reconnect your PS4 controller to the PS4 console using a USB cable.
  4. Power on the PS4 console using a USB cable plugged-in controller.
  5. As the console starts up it should be in safe mode.

5. Replace Your PS4 Controller Battery

After long periods of use, the battery disengages and fails to recharge after the connection of the cable. It’s so why the PS4 controller red light appears on the PlayStation 4 keyboard. Ensure that the new battery is in its place and meets the specifications of the controller.

If you change batteries with the new ones then the batteries you used can resolve the red light issues of the PS4 controller. Make sure the PS4 controller is not synchronized with an essential battery for this synchronization if none is done then the controller will automatically synchronize.

6. Change Your PS4 Controller’s Ribbon Cable

A defective ribbon cable can also show a red light in your PS4 Controller. It just meant there might be a hardware malfunction. If a ribbon cable is tampered with or damaged then it fails to charge a battery.

It causes the gaming player to encounter a bad battery. To overcome this problem you need to replace the ribbon cable. Problems usually occur because of a faulty ribbon cable or damaged wires.

Can I Change The Color Of The PS4 Controller’s Light Bar?

Player 1 is blue player 2 is red, player 3 is green, and player 4 is pink. You should create different profile types and then switch users as you log off without affecting your account. There’s no option to change the lighting bar color on your PS4 controller.

You can change the user to the color that you want to change. You can choose multiple users at the same time until you have the desired color. You can even switch profiles to different profiles at the same time.

If All Else Fails Buy A New PS4 Controller

Contact Sony Official Support

PlayStation fans have found a way to solve the PS4 Controller Red Light issue, but it’s not as easy or straightforward. If you notice that there is still red light on your DualShock 4 after following these tricks and techniques then it might be time for an untimely farewell because something may really be broken inside your PS4 controller!

But don’t worry; PlayStation offers free customer support in case this happens so just contact them through their website at Playstation Support where they can provide suggestions tailored specifically towards fixing any PS4 and PS4 controller red light problems. If you are having problems with your Xbox controller check out “How To Fix Xbox Controller Keeps Disconnecting.”

Read also: Best USB Hub For PS4

Closing Regards

The controller is the most important gaming device for many gamers. That’s why it can be frustrating when you see your PS4 controller red light blinking, signaling that something has gone wrong with one or more of its parts.

Fortunately, there are a few simple things you can do to fix this problem and get back in the game as quickly as possible without having to send away your console for repairs!

Luke Kline

Luke Kline

Hi, I'm Luke Kline and I've been a gamer my whole life. When I was 13 years old, I built my first gaming PC from scratch to compete with the kids on the block. Since then, I have built dozens of other gaming PCs for various friends and family members and found a love for many PC games too. Most notably, League of Legends where I have worked to become a platinum player for many seasons. That led me to earn my bachelor's degree in cyber security and technology, which eventually culminated into what you see today: a gaming expert who has hands-on experience with hundreds of gaming and tech products. I have been writing reviews, how-to articles, streaming gameplay, creating YouTube videos, and have extensive knowledge about everything gaming!